B2CB0DK1 - 406D9 AL4 AUTOMATIC GEARBOX
IDENTIFICATION AUTOMATIC GEARBOX
1 - IDENTIFICATION
The automatic gearbox is identified by a self-adhesive label (A) or an engraving (B) :
2 - TIGHTENING TORQUES
| reference | da.Nm |
|---|---|
| special features | without |
| (1) pre-tightening : converter | 1.0 |
| (1) tightening : converter | 3.0 |
| (2) gearbox mounting on crankcase | 5.2 |
| (3) speedometer drive | 1.0 |
| (4) solenoid valves and/or regulators on hydraulic block | 0.9 |
| (5) hydraulic block | 0.8 |
| (6) hydraulic block housing | 0.8 |
| (7) automatic gearbox input speed sensor | 1.0 |
| (8) automatic gearbox output speed sensor | 1.0 |
| (9) supply pressure sensor | 0.9 |
| (10) flow control solenoid in the exchanger | 1.0 |
| (11) multi-function switch | 1.0 |
| (12) cover stop | 1.5 |
| (13) automatic gearbox heat exchanger | 5.0 |
| (14) filler plug | 2.4 |
| (15) level plug | 2.4 |
| (16) gearbox drain plug | 3.3 |
| (17) gearbox bracket | 4.5 |
| drive shaft nut (M24 X 150) |
32.5 |