B2CDF4K1 - 406D9 AL4 AUTOMATIC GEARBOX

GENERAL FUNCTION SHIFT-LOCK (AL4)

2 - PRINCIPLE OF OPERATION

The Shift-Lock function is a safety system which immobilises the gear selection lever in position P if the driver does not press the brake pedal .

3 - {{N6767}} DEVERROUILLAGE DU LEVIER DE PASSAGE DES VITESSES

Gear lever in position P .

Switch on the ignition .

Press the brake pedal .

Move the gear selection lever .

1 - {{N6768}} IMPOSSIBILITE DE DEVERROUILLER LE LEVIER DE PASSAGE DES VITESSES

Causes :

• battery voltage
• electro-magnet on the gear selection lever unit
• gear selection lever position switch
• automatic transmission control unit
• electrical harness
• brake pedal switch

1 - 1 - {{N6767}} DEVERROUILLAGE DU LEVIER DE PASSAGE DES VITESSES (DEFAULT MODE)

Release the Shift-Lock using a screwdriver .

Remove the blank (1) .

Release the Shift-Lock using a screwdriver .