B2CH0LK1 - 406D9 4HP20 AUTOMATIC GEARBOX
REPLACEMENT AUTOMATIC GEARBOX FLUID TEMPERATURE SENSOR
IN ORDER TO CARRY OUT WORK ON THE AUTOMATIC GEARBOX FLUID TEMPERATURE SENSOR, REMOVE THE HYDRAULIC BLOCK .
(1) Fluid temperature sensor .
To replace the fluid temperature sensor (1), the entire hydraulic block electrical harness assembly must be replaced .
When refitting the harness, ensure that it is routed correctly and positioned correctly in the sheaths to prevent crushing on refitting of the hydraulic block .
THEN REFIT THE HYDRAULIC BLOCK .