C5DG0TF1 - 406D9
REMOVAL - REFITTING BRIGHTNESS SENSOR AND RAIN SENSOR ASSEMBLY
1 - REMOVAL
Slide the interior mirror downwards (At A) .
Disconnect the connector (1) .
Remove the interior mirror .
Using a screwdriver, unclip and tilt the left and right retaining clips (2) .
Disconnect the connector (3) .
Remove the brightness sensor and rain sensor assembly (4) .
WARNING : take all necessary precautions to keep the sensor assembly surface clean and free of scratches (place it in an envelope, for example) .
2 - REFITTING
IMPERATIVE : clean the windscreen sensor area (using a cleaning diluting agent, for example) before refitting the sensor assembly .
Proceed in the reverse order to removal .