E5AB00V1 - 406D9
NEW SPECIAL TOOLS
| mechanical | ||||
|---|---|---|---|---|
| description | workshop reference | part number | page of the special tools catalogue number 1532 : 04 / 2000 |
comment(s) |
| valve stem seal extractor DW12 | (-).0170-ZZ | 9780.32 | 32 | valid for all models |
| hub immobiliser tool (ES engine ) | (-).0187-N | 9780.39 | 38 | valid for 406 |
| set of tools DW12 | (-).0188-AA + AB + AC | 9780.40 | 39 | valid for 406 |
| overhead camshaft setting rod (EW12 engine) | (-).0189-L | 9780.37 | 40 | valid for 406 |
| balancing shafts kit EW12 / DW12 | (-).0190 | 9780.38 | 41 | valid for 406 |
| gear lever locking tool ML | (-).0216-M | 9769.JC | 51 | - |
| automatic gearbox support pins 4HP20 | (-).0336-Q + R | 9780.42 | 65 | valid for 406 |
| front sub-frame aligners | (-).0623 | 9780.34 | 99 | valid for 306 / PARTNER |
| brake servos nut adaptor | (-).0813 | 9769.JA | 116 | - |
| rear spring cups | (-).0915-D2Z | 9769.HZ | 123 | - |
| front spring cups | M 12 | 9776.X3 | 127 | valid for 206 / 306 / 406 |
| torque screwdriver for valves SCHRADER | FACOM A 312A | 9872.FH | 132 | - |
| union/injector tightening socket DW12 | (-).1603-L | 9780.54 | 242 | valid for 406 |
| wrench for removal-refitting of the nut/particulate emission filter injector bush | (-).1606 | 9769.KH | 244 | - |
| injector tightening kit DW12 | (-).1608 | 9780.48 | 244 | valid for 406 |
| bodywork | ||||
|---|---|---|---|---|
| description | workshop reference | part number | page of the special tools catalogue number 1532 : 04 / 2000 |
comment(s) |
| addition to the front sub-frame jig | (-).1107 | 9769.JZ | 140 | addition to the jig 605 |
| front marking jigs + front half panel positioning templates + rear wings adjusting tool |
(-).1118 | 9769.KG | 142 | - |
| set of additional body jig heads BLACKHAWK | PEU.87.399 | 9769.KC (*) | 147 | supplement to set of heads 605 |
| complete set of heads BLACKHAWK | PEU.88.620 | 9769.KA (*) | 146 | - |
| set of additional body jig heads CELETTE | 605.305 | 9769.KF (*) | 160 | supplement to set of heads 605 |
| complete set of heads CELETTE | 835.300 | 9769.KE (*) | 159 | - |
| body equipment kit | (-).1349 | 9769.HT | 216 | - |
| aluminium bonnet flattening kit | (-).1527 | 9769.JW | 235 | - |
| (*) : manual control | ||||
| electrical | ||||
|---|---|---|---|---|
| description | workshop reference | part number | page of the special tools catalogue number 1532 : 04 / 2000 |
comment(s) |
| tool for forcing discharge of the valve pressure module SCHRADER | (-).1244-B | 9769.HV | 174 | addition to the protocol reader S.1244 (Part No. 9769.FW) |
| wire piercer case | (-).1260 | 9769.JX | 175 | - |
| addition to the battery tester | IB 12 | 9769.JV | - | |