B2CB4HK1 - 307 MA GEARBOX
PRESENTATION OF GEARBOX SPECIAL TOOLS MA
| reference | description | reference | reference |
|---|---|---|---|
| [1] | tool for unclipping 10 dia. ball joints | (-).0216-G1 | - |
| [2] | tool for unclipping 13 dia. ball joints | (-).0216-G2 | - |
| [3] | CLIC clip pliers | (-).0172 | - |
[4] Drain plug spanner (-).1402 .
[5] FACOM 376 type manual oil syringe/pneumatic gearbox filler RH100 .
[6] Locking tool (-).0313-C .
[7] Bonnet stay (-).1347-C .
[8] Slide hammer (-).0316-A2 .
[9] Set of 2 spring retaining rods (-).0918-Z .
[10] fitting drift for final drive right-hand output oil seal (-).0317-U .
[11] fitting drift for final drive left-hand output oil seal (-).0317-T .
[12] three legged extractor FACOM U20 .
| reference | description | reference | reference |
|---|---|---|---|
| [13] | universal extractor | FACOM U53T + U53K | 4108-T |
| reference | description | reference | reference |
|---|---|---|---|
| [14] | differential bearing outer race fitting drift | (-).0317-AJ | - |
| [15] | cylindrical pins extractor including : [C1] - [C2] - [C3] - [C4] |
(-).0317-AD | 4179T-C1 |
| reference | description | reference | reference |
|---|---|---|---|
| [16] | fitting tool for input shaft spring ring | (-).0317-AK | 8.0313T-M |
| [17] | tool for fitting input shaft bearings | (-).0317-F | 7.101T-F |
| reference | description | reference | reference |
|---|---|---|---|
| [18] | tool for removal-refitting of intermediate plate rings | (-).0317-Q | |
| [19] | ring extractor | (-).0317-AS | - |
| reference | description | reference | reference |
|---|---|---|---|
| [20] | synchroniser assembly ring | (-).0317-AA | - |
| [21] | final drive left-hand output oil seal fitting drift | (-).0317-T | 7.101T-W |
| reference | description | reference | reference |
|---|---|---|---|
| [22] | tool for fitting the output shaft bearing at the 4th speed end | (-).0317-B | 7.101T-B |
| [23] | stop ring drift | (-).0317-P | 4508T-V |
| [24] | spacer washer | (-).0317-Q | 4508T-U |
| [25] | cylinder head centralising pin fitting tool | (-).0317-E | 7.101T-E |
| [26] | fitting tool for the output shaft circlip | (-).0317-R | 7.101T-T |
| reference | description | reference | reference |
|---|---|---|---|
| [27] | thrust button for extracting final drive bearings | (-).0317-JZ | 4508T-J' |
| [28] | tool for fitting final drive bearings | (-).0317-D | 7.101T-D |
| reference | description | reference | reference |
|---|---|---|---|
| [29] | tool for fitting the 5th gear to the input shaft | (-).0317-F | 7.101T-F-J' |
| [30] | fitting tool for input shaft spring ring | (-).0317-AK | 8.0313T-M |
| [31] | socket for tightening the output shaft nut | (-).0317-Z | 4526-T |