C4CH1ZF1 - 307 5 DOOR SALOON

REPLACEMENT DOOR PANEL

IMPERATIVE : THIS VEHICLE HAS BEEN DESIGNED USING THE MIG BRAZING PROCESS TECHNIQUE ; when the structure is repaired, all the connections concerned must be welded using the same procedure ; any other technique is prohibited .

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Removal - refitting : DOOR .

Remove-refit trim : The door .

Detach the electrical harnesses .

2 - IDENTIFICATION OF REPLACEMENT PARTS

3 - PART REQUIRED

Front door panel .

4 - PREPARATION OF THE NEW PART

5 - CUTTING OUT

6 - SEPARATING

7 - ADJUSTMENT

8 - CRIMPING

9 - WELDING

10 - SEALING

11 - PROTECTION