B1BB14K1 - 607 EW12J4 ENGINE
DATA - IDENTIFICATION TIGHTENING TORQUE(S) (EW12J4)
1 - IDENTIFICATION
1 - 1 - CYLINDER HEAD
| cylinder head identification | |
|---|---|
| engine code | 3FZ |
| engine type | EW12J4 |
| special features | without |
| reference A | N/A |
| reference B | N/A |
| reference C | boss |
| reference D | N/A |
| reference E | N/A |
.
1 - 2 - CYLINDER HEAD GASKET
(1B) Nominal dimension .
(1C) Repair size .
| cylinder head gasket (not XUD / DW) | |
|---|---|
| engine code | 3FZ |
| engine type | EW12J4 |
| special features | REINZ |
| engine identification (group 1A) | without |
| nominal dimension (group 1B) | E - G |
| repair size (group 1C) | E - F - G |
1 - 3 - CYLINDER HEAD BOLT
X = Length under head of bolt .
2 - DATA
| cylinder head : petrol | |
|---|---|
| engine code | 3FZ |
| engine type | EW12J4 |
| special features | REINZ |
| type of cylinder head gasket | laminated metal gasket |
| theoretical thickness (mm) | 0.8 |
| repair dimensions (mm) | UNK. |
| bolt length (mm) X nominal | 127.5 |
| bolt length (mm) X max. | 129.5 |
| maximum cylinder head bow (mm) | 0.05 |
3 - TIGHTENING TORQUE(S)
| engine code | 3FZ |
|---|---|
| engine type | EW12J4 |
| special features | without |
| pre-tightening (da.Nm) | 1.5 |
| pre-tightening (da.Nm) | 5 |
| slackening (°) | 360 |
| tightening (da.Nm) | 2 |
| 1st angular tightening (°) | 270 |