B1CB2CK1 - 607 DW12TED4 ENGINE
IDENTIFICATION BALANCE SHAFTS
The engine balancing shafts housing has the oil pump fastenings at K .
I - Marker holes for fitting the balancing shafts .
J - Balancing shafts marking zone .
Adjustment : The balancing shafts operating clearance of between 0,01 and 0,06 mm is obtained by spacers placed between the cylinder block and the balancing shaft housing .
| thickness of the spacer | |
|---|---|
| reference | height (mm) |
| 57 | 1,57 |
| 55 | 1,55 |
| 53 | 1,53 |
| 51 | 1,51 |
| 49 | 1,49 |
| 47 | 1,47 |
| 45 | 1,45 |
| 43 | 1,43 |
| 41 | 1,41 |
| 39 | 1,39 |
| 37 | 1,37 |
| 35 | 1,35 |
| 33 | 1,33 |
| 31 | 1,31 |
| 29 | 1,29 |
| 27 | 1,27 |
| 25 | 1,25 |
| 23 | 1,23 |
| 21 | 1,21 |
| 19 | 1,19 |