B3FB14K1 - 607

IDENTIFICATION, DATA, TIGHTENING TORQUE(S) (BRAKES)

1 - IDENTIFICATION

2 - DATA

2 - 1 - FRONT BRAKES

engine code RHZ - 3FZ - RFN
4HX - 4HZ		 XFX
special features N.E. N.E.
type of brakes ventilated disc ventilated disc
theoretical diameter (mm) 283 309
theoretical thickness (mm) 26 32
min.thickness (mm) 23.9 30
maximum run-out (mm) 0.05 0.05
variation in thickness (max.) (mm) 0.01 0.01
minimum thickness (brake plate) (mm) 2 2
brake calipers LUCAS C57 BREMBO 4 pistons
piston diameter (mm) 57 2 X 38
2 X 42

N.E. : Non-existent .

2 - 2 - REAR BRAKES

engine code all engines
special features N.E.
compensator type electronic braking distribution
type of brakes solid disc
disc nominal diameter (mm) 290
theoretical thickness (mm) 10
min.thickness (mm) 7.9
maximum run-out (mm) 0.05
variation in thickness (mm) 0.01
minimum thickness (brake plate) 2
brake calipers TEVES FR133
piston or slave cylinder diameter 33
theoretical diameter (drum) 185
max.diameter (mm) 186
maximum out-of-round (mm) 0.05
brake linings (thickness X width) 4.5 X 30
handbrake adjustment knob(s) : 6 notch(es)
cable : 0.5 mm

N.E. : Non-existent .

3 - TIGHTENING TORQUE(S)

reference description tightening torque(s) (da.Nm)
2 front brake discs fasteners 1
3 front caliper fastening 2.5
4 front brake caliper bracket fastening to pivot LUCAS : 10
BREMBO : 11
5 brake servo unit fastener 5a : 2
5b : 1.7
5c : 1.7
5d : 2
6 master cylinder fastener 2
7 pedal shaft nut 2
8 vacuum pump fastener 2
9 brake pipe unions 1.5
10 ABS sensor 1
11 pedal bracket 2
15 rear brake backplate fastener 5
16 wheel slave cylinder fastener N.E.
17 drum fastener N.E.
18 rear caliper fastener 18a : 2.5
18b : 5
19 rear brake disc fastener 1
20 brake compensator fastener N.E.
21 compensator adjustment N.E.
22 compensator spring N.E.
23 ABS sensor fastener 1
24 handbrake lever fastening 1.5
25 brake pipe unions 1.5

N.E. : Non-existent .