B3CB0GK1 - 307
DATA ; TIGHTENING TORQUES FRONT SUSPENSION
1 - DATA
1 - 1 - FRONT ANTI -ROLL BAR
| anti-roll bar diameter | |||
|---|---|---|---|
| engine code | KFW - NFU - 8HZ | RFN - RHY - RHZ | RFP |
| diameter (mm) | 21 | 22 | 23 |
1 - 2 - FRONT AXLE ANGLES
| front axle angles | ||||
|---|---|---|---|---|
| engine code | KFW - NFU - RHY | RFN - RFP - RHZ | KFW - 8HZ | NFU - RFN - RHY |
| special features | 195/65 R15 tyres | 205/55 R16 tyres | 'Affaire' ; 195/65 R15 tyres | overseas export ; 195/65 R15 tyres |
| H1 (mm) +12/-10 | 156 | 152 | 157 | 175 |
| track / wheel (mm) | -1 ± 0.5 | -1 ± 0.5 | -1 ± 0.5 | -1 ± 0.5 |
| track / wheel (°) | -0° 9' ± 4' | -0° 9' ± 4' | -0° 9' ± 4' | -0° 9' ± 4' |
| camber | 0° ± 30' | 0° ± 30' | 0° ± 30' | 0.15° ± 30' |
| castor | 5° 18' ± 30' | 5° 18' ± 30' | 5° 39' ± 30' | 5° 18' ± 30' |
| pivot angle | 11° 41' ± 30' | 11° 47' ± 30' | 11° 41' ± 30' | 11° 16' ± 30' |
1 - 3 - TRACK ; VEHICLE AT KERB WEIGHT
NORMAL SUSPENSION
(H) Height between the ground and the jacking point ± 1 mm .
(P) Tracking at the axle ± 1 mm .
HEAVY DUTY SUSPENSION
(H) Height between the ground and the jacking point ± 1 mm .
(P) Tracking at the axle ± 1 mm .
ALL MODELS
2 - TIGHTENING TORQUES
(1) Shock absorber rod fixing ; 6.9 da.Nm .
(2) Shock absorber to pivot fixing ; 9 da.Nm .
(3) Steering tie rod ball joint fixing ; 5 da.Nm .
(4) Engine sub-frame front fastener ; 10 da.Nm .
(5) Engine sub-frame rear fastener ; 10 da.Nm .
(6) Arm front fixing to sub frame ; 11 da.Nm .
(7) Arm to sub-frame rear fixing ; 11 da.Nm .
(8) Pivot bottom mounting ; 5 da.Nm .
(9) Anti-roll bar to shock absorber fixing ; 3.6 da.Nm .
(10) Anti-roll bar bearing fixing ; 10.4 da.Nm .
(11) Mounting link to anti-roll bar ; 3.6 da.Nm .
(12) Pivot ball joint ; 23 da.Nm .
(13) Steering rack fastener to sub-frame ; 8 da.Nm .