C4CH25F1 - 307

REPLACEMENT SILL WEB

IMPERATIVE : THIS VEHICLE HAS BEEN DESIGNED USING THE MIG BRAZING PROCESS TECHNIQUE ; when the structure is repaired, all the connections concerned must be welded using the same procedure ; any other technique is prohibited .

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement ; OUTER SILL .

2 - IDENTIFICATION OF REPLACEMENT PARTS

3 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

4 - CUTTING OUT

5 - RELEASING

6 - ADJUSTMENT

7 - WELDING

8 - PROTECTION