C4DH0HF1 - 307

REPLACEMENT ROOF BOW

IMPERATIVE : THIS VEHICLE HAS BEEN DESIGNED USING THE MIG BRAZING PROCESS TECHNIQUE ; when the structure is repaired, all the connections concerned must be welded using the same procedure ; any other technique is prohibited .

WARNING : place the air bag in contact with the generator for safety reasons .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement :

• ROOF
• CENTRE PILLAR

2 - IDENTIFICATION OF REPLACEMENT PARTS

(1) Windscreen pillar insert .

(2) Windscreen aperture surround .

(3) Cantrail inner panel .

(4) Roof front cross member .

(5) Roof bow .

3 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

(1) Windscreen pillar insert .

(2) Windscreen aperture surround .

(3) Cantrail inner panel .

Roof crossmember .

Roof bow .

4 - PREPARATION OF THE NEW PART

5 - CUTTING OUT

6 - SEPARATING

7 - ADJUSTMENT

8 - WELDING