C4AH1BF1 - 607

DAMPER BRACKET REPLACEMENT, PANEL SUPPORT ASSEMBLY, UPPER FRONT HALF PANEL

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement :

• front wing
• HEADLIGHT

Removal - refitting :

• BUMPERS
• bumper stiffener
• bumper impact absorber
• front panel
• battery
• battery support
• headlamp lower bracket
• detach the electrical harnesses

2 - SPECIAL FEATURES

For adjustment of the half-panel, use the relevant positioning jigs .

3 - IDENTIFICATION OF REPLACEMENT PARTS

Impact absorber support .

Panel support assembly .

Upper front half panel assembly .

4 - COMPOSITION

(1) Front panel support .

(2) Front engine sub-frame securing bracket assembly .

5 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

Impact absorber support .

Front panel support .

Upper front half panel assembly .

6 - PREPARATION OF THE NEW PART

7 - TOOLING

Case part number (-).1118 including the following tools :

• rear wing clamping tool [1]
• templates for marking the front chassis legs cut-outleft-hand side [3], right-hand side [2]
• front half panel [4] - [5] positioning templates

For this procedure, use the panel positioning template [4] or [5] .

8 - CUTTING OUT

9 - RELEASING

10 - ADJUSTMENT

[1] Positioning template [5] .

11 - WELDING

12 - PROTECTION