C4AH1DF1 - 607

REPLACEMENT OF WHEEL ARCH ASSEMBLY

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement :

• front wing
• BONNET
• headlamp bracket
• UPPER FRONT HALF-PANEL

Removal - refitting :

• SCREEN WIPER MECHANISM

Detach :

• front carpet, partly
• electrical harnesses

2 - IDENTIFICATION OF REPLACEMENT PARTS

Front wheel arch assembly .

Passenger compartment side front stiffener .

Front wing inner panel .

3 - REPLACEMENT PART COMPOSITION

(1) Suspension bracket stiffener .

(2) Suspension mounting .

(3) Suspension bracket stiffener .

(4) Bonnet strut support .

(5) Chassis leg front closing panel .

(6) Brake hose bracket .

(7) Front wheel arch .

(8) Lower front half panel .

(9) Horn bracket .

(10) Impact absorber support .

4 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

Front wheel arch assembly .

Part passenger compartment side front stiffener .

Part front wing inner panel .

Impact absorber support .

5 - PREPARATION OF THE NEW PART

6 - CUTTING OUT

7 - SEPARATING

8 - ADJUSTMENT

9 - WELDING

10 - SEALING

11 - PROTECTION